Liner Nip

Account limit of 2114 requests per hour exceeded.

Impact Crusher of Maintenance

Sand production line, impact crusher is the

third procedure, through the jaw crusher big stores are, to the crusher in again after

broken into customer needs 20 ~ 60mm particles. Impact Crusher is a machine using impact

energy to break. To ensure the crusher, and better in the sand in the production line in

continuous operation, extending the life of Impact Crusher, the user should Crusher regular

maintenance and care. In the new machines put into operation, the class must fight back when

the work is completed a comprehensive examination of breaking. Counterattack after a week

break to run the motor, lubrication conduct a comprehensive inspection. Check the contents

of the situation, including fixed parts of the fastening, belt drive, bearings seals,

counter-liner, liner wear full-up position of the inspection, maintenance cycle, combined

with the establishment of regular maintenance and replacement system. Crusher's rotor and

counter-liner gap adjustment: When the rotor crusher run, the rotor and counter space

between the liner can not be adjusted. Such as the materials into blocks stuck in between

the counter plate and shell, it is proposed to re-adjust a bit up counter space between the

frame, such as feed blocks will become loose, easy to adjust the frame counter. If the

counter-frame are inadequate and can relax in the bar, on tap (with a piece of wood

protection), rotor and counter-liner clearance adjusting device from the machine to complete

the first set of loose bolts, and then turn a long nut, this upward direction of movement

when the rod will adjust the set screw fastening Fortunately, the.

Crusher replacement of wearing parts:

Crusher replacement of wearing parts, the first opened shelves. Use, the first box after the

connection was added with the bolt removed, and then use wrench to the hexagonal head part

of the clamshell device, and then slowly open shelves. In the meantime, can use the top rack

after rack hanging device Diaozhu. Repeat the above process, that is after closing the

shelves. Crusher's board hammer: hammer counter broken board should wear to a certain degree

of adjustment or replacement in time to avoid damage to fasteners and other components.

Crusher lining: opened shelters, removal of the fixed counter Liner opening pin, slotted

nut, bolt, can be worn to counter the liner replaced. Such as the installation of new

counter-liner, reverse the above steps immediately.

Impact Crusher how high bearing temperature: 1. Grease excessive or inadequate: Check

whether the excess grease 2. Grease stains: a clear change after bearing grease 3. Bearing

Damage: replacement crusher in the system Sand production line played a key step in the use

of the process, we must promptly maintenance and repair, the problem nipped in the bud, not

runs the risk, take the lead to loss of even more serious, Que Bao Zheng Chang stable system

of sand production line state.

About the Author

The resources come from shanghai zenith

company,if you want to more info ,please visit:http://www.cnzenith.com